Cart currency: AUD. Final total is shown at checkout.
Check the product details for fitment, exclusions and included parts before ordering. Need help choosing?
Spend A$249.00 more for free standard shipping in Australia.
Free standard shipping is for Australian addresses on orders over A$249. Your shipping cost is confirmed at checkout. Shipping details
Looking for smoother slide cycling and reduced felt recoil on your CZ 75, SP-01, or Shadow 2? The progressive recoil spring is a proven competition upgrade that Australian IPSC and USPSA shooters rely on for faster split times and less slide battering.
The CZ 75/Shadow 2 Progressive Recoil Spring delivers noticeably smoother slide cycling and reduced felt recoil compared to the factory constant-rate spring. Progressive winding means the spring resistance builds gradually through the stroke — softer initial travel for faster cycling, with full resistance at the rear to prevent battering. A meaningful performance upgrade that you'll feel from the first round.
Key Features
Progressive Rate Design — Resistance increases through the stroke for smoother cycling and less slide battering.
Reduced Felt Recoil — Softer initial compression means the muzzle recovers to target faster between shots.
Faster Split Times — Quicker slide return translates to tighter shot-to-shot splits in competition.
Division notes
IPSC Production and Production Optics allow aftermarket springs in the same configuration as the original (IPSC Handgun Rules, Jan 2026, Appendix D4 and D4a, rule 19.4). Also suits Standard and Open. Check your division rules before match day.
Compatibility
CZ 75 / CZ 75 B
CZ 75 SP-01 / SP-01 Shadow
CZ Shadow 1
CZ Shadow 2
What's in the Box
1x CZ 75/Shadow 2 Progressive Recoil Spring
Installation
Difficulty: Easy. Field strip the pistol, remove the factory recoil spring and guide rod assembly, swap the spring, and reassemble. Standard field-strip process — takes under 5 minutes with no special tools.
What is the difference between a progressive and constant-rate recoil spring?
A constant-rate spring has uniform resistance throughout compression. A progressive spring starts softer and builds resistance — giving you smoother cycling, less slide battering, and faster target re-acquisition.
Will the progressive recoil spring work with my factory CZ guide rod?
Yes. The progressive recoil spring is a direct replacement that works with the factory guide rod on all compatible models.
Do I need to change my firing pin if I install this spring?
Not necessarily. This is a recoil spring, not a hammer spring — it doesn't affect firing pin strike energy. However, if you're also installing lighter trigger springs, an extended firing pin is recommended.
How often should I replace my CZ recoil spring?
For competition use, inspect every 3,000–5,000 rounds. Replace when you notice sluggish cycling, failure to return to battery, or visible spring fatigue.
Orders are dispatched within 1–2 business days. All shipments include tracking details once dispatched.
Estimated Delivery Times
Australia: Express 1–3 business days, Standard 3–7 business days (metro vs. regional may vary).
International: Options shown at checkout; all orders shipped with tracking.
Please note that delivery times are estimates and may vary depending on the carrier or location. Retain packaging and contact us if you experience any transit issues.
If you are running a CZ Shadow 2 OR with custom low-power-factor reloads, the 10lb Boss Components Progressive Spring is a game-changer. I swapped this into my optics-ready setup to tune it specifically for my tailored hand loads, and the performance is incredible. It tracks beautifully, eliminates slide dip, and ensures 100% cycling reliability even with lower-pressure rounds. The progressive rate does a fantastic job of absorbing the recoil while keeping the dot steady in the glass. It is an absolute must-have for anyone looking to optimize their Shadow 2 competition rig!
I installed the Boss Components Progressive Spring into my CZ Shadow 2 Optics Ready (OR), and it has been absolutely stellar. After extensive use, it has run smoothly without a single incident, hitch, or malfunction. The progressive tension is a perfect match for the Shadow 2's slide weight, delivering a noticeably smoother recoil impulse and keeping the red dot tracking flat for incredibly fast follow-up shots. It feels robust, well-engineered, and handles factory ammunition perfectly. If you want reliable, match-grade performance for your Shadow 2, this is a flawless upgrade.
Adding this recoil spring has greatly improved. How flat my gun shoots now
It has made a significant difference. And i'm so very happy that I added this into my pistol
I highly recommend getting your information from the experts at Boss Components. Using an incorrectly weighted spring can cause firearm malfunctions and create a serious safety risk, particularly for novices. The Boss Components spring works perfectly, and I was very impressed with their service and fast delivery.
Bought several progressive springs from Boss Components for my Staccato XL (2011). The problem I was trying to solve was misfeeds with the factory spring (7 lb) when using low muzzle energy 9 mm ammo, specifically 147 gr, 900 fps rounds. The BC 7 lb (nominal) progressive spring solved the problem. Note that the factory spring measured 7.5 lbs at full travel while the BC was 10.5 lbs, much better at closing the slide. The progressive spring basically acts like a 7 lb spring in terms of felt recoil, but reliably closes the slide, more like a 10 lb spring. Solved my problem without noticeably increasing the felt recoil.
For 2011 shooters, note that the barrel ramp is steep and builds up carbon quickly. Flat head rounds (e.g., Syntech) are especially prone to "stick" to a dirty ramp, which causes misfeeds. Other causes are riding the slide with your thumb and of course a spring that is too weak.
I like the design of this spring and the feel of my S2 recoil impulse. I am currently using the 12lb progressive spring with the Boss tungsten guide rod. The slide closes a little more slowly than I am used to, but I havent had any malfunctions with factory Blazer ammo
